CLAS OE 2040 Mode D'emploi page 11

OE 2040
MULTICHARGER STATION 4 CHANNEL
9. Disconnecting a battery from OE 2040
OE 2040 is safely maintaining the battery at a full charge when the green light is on. The battery is ready. Sim-
ply remove the battery clamps and set them on the working surface clear from the other batteries and battery
clamps. You can now load test the battery if necessary.
1.When the battery clamps are accidentally disconnected while charging is in effect, the OE 2040 will shut
off. Green indicator light will go ashing. Simply reconnect the battery charged.
2.Do not disconnect the battery while charging at 5Amps. Wait for both green and red LED light on.
10. If you would like to charge 4 pieces of 12V battery in series connection, please connect OE 2040 stations
to the batteries as the drawing below:
Note:
• Each station of SCM54E can only be connected to one battery.
• Never connect one station to two or more different batteries.
• Please refer to the drawing below.