Miele FRZ01 Notice De Montage page 4

Produktgruppe 512
4 von 26
en
Parts required
Quantity Mat. no.
1 06256860
Note
Service and repair work should only be carried out by a suitably qualified electrician (with specialist training, knowledge and experience,
and recent related work experience) in accordance with all appropriate local and national safety regulations.
Servicing, modification, testing and maintenance of electrical appliances should only be carried out in accordance with all appropriate
legal requirements, accident prevention regulations and valid standards.
All regulations of the appropriate utility supply companies and standards relating to safety (not limited to electrical safety) are to be
complied with.
Danger!
Even with the machine switched off, mains voltage may be applied to some components.
Before any service work is commenced, the machine must be disconnected from the mains. Suitable measurements must be made to
ensure that this is the case.
A general visual check should always be carried out.
Incorrect conversion or service work could lead to a risk of fire.
Note
The kit contains the following:
1 flow meter
1 adapter for water intake
2 seals 3/4 16 x 23.8 x 1.5
Various cable holders 98 x 2.5
1 cable through-feed M12 x 1.5
1 wiring diagram: Multifunction module 07 MF07 PW Flügelradzähler (flow meter)
1 conversion and fitting instructions
List of illustrations:
Fig. 1: Connection of flow meter to 3/4 stopcock
Fig. 2: Connection of water intake hose or Y-piece to flow meter
Note
PW 6101, PW 6131, PW 6161, PW 6201
The flow meter can only be fitted if the "MF07 multifunction module is already fitted in the machine.
Note
PW 6163, PW 6243, PW 6323
The flow meter can only be fitted if the kit BSF-RU flow meter clean/soiled side is already fitted in the machine.
29.04.2009 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
Designation
Flow meter FRZ01 fitting kit
M.-Nr. 06258811