Nedo X-Liner 360 2 green Mode D'emploi page 11

4 Structure of the Instrument
Pendulum lock OPEN/CLOSED
12
1
1
Laser beam operating button
Switches the laser beam on and on/off in the relevant
order:
Pendulum locking device is released:
Release the pendulum locking device: Switch on unit.
Press 1x: 1. Vertical laser beam (V1)
Press 2x: 2. Vertical laser beam (V1/V2)
1
Press 3x: 3. Laser beam, horizontal
and vertical (360°/V1/V2)
Lock the pendulum locking device to switch the
unit back off again.
Pendulum locking device is locked:
Press 1x long: Switch on unit. Laser beam, horizontal
Press 2x: 1. Vertical laser beam (V1)
Press 3x: 2. Vertical laser beam (V1/V2)
1
Press 4x: 3. Laser beam, horizontal and
vertical (360°/V1/V2)
Press 5x: Switch off the unit
PULS button
Keep the button pressed for approx. 3 sec. to switch
1
the laser beam to PULS mode for use of a laser
receiver.
X-Liner 360 2 green
Position 1
The pendulum locking device is locked.
The self-levelling function is disabled.
Position 2
The pendulum locking device is
unlocked.
The self-levelling function is active.
Laser beam, horizontal
OPERATING INSTRUCTIONS
EN
1
1
11