Manual Control - Stagnoli ICARUS Instructions

overhead garage doors
Cable and sheath
holder square (n° 2)
Sectional doors
Istruzioni Instructions Anleitungen Instructions instrucciones

MANUAL CONTROL

Sheath
Sheath
Cable and sheath
holder square
Cable
Cable
clamping
unit
slide
lever
eye
Door fastening
Cable
bracket
Cable
Cable
clamping
unit
Fix the two cable and sheath
holder squares; insert the ends
of the sheath in their place on
the slide and on the first
bracket; insert the sheath,
take the metal cable and
thread it through the eye on
the slide lever; insert it in the
squares, threading it through
the handle
perforated) and lock it with
the clamp that loads the slide
spring. By turning the handle
from 90° to 180° the geared
motor is released.
Insert the ends of the sheath
in their place on the slide and
on the door fastening
bracket; insert the sheath,
take the metal cable and
thread it through the eye on
the slide and then through the
bracket; lastly, thread
through the handle (already
perforated) and lock it with
the clamp, loading the slide
spring. By turning the handle
from 90° to 180° the geared
motor is released.
(already
it
16