Telefunken HappyCare FE-4 Mode D'emploi page 25

 Never use sharp objects to remove the deposits of the sole.
 Never hold the iron or the base unit under the tap water.
WARNING: Always let your steam iron unplugged and cool down for at least one hour
before any cleaning operation except for Auto Clean! To start the cleaning process, put
your appliance close to a sink as water may come out of the tank when it is opened. Do not
use any industrial or harsh descaling products when rinsing the boiler tank to avoid
damaging the iron.
 Your cordless steam iron is equipped with the Auto Clean function. To extend the lifetime of your
appliance and keep the steaming performance at its optimum level, it is recommended to
perform monthly the Auto Clean Function. Follow the below step:
Step 1
Fill in your water tank with a jug,
ensure to respect the Max. level
indicator.
Step 4
As soon as the heating light
indicator is switch off, unplug the
iron and set the thermostat dial
to minimum.
Step 2
Set the steam control joystick on 0.
Step 5
Hold your iron above the sink,
keep pressing the Auto Clean
button and gently shake the
iron to flush out the scales until
all water has been used.
Step 3
Plug your steam iron into a wall
socket then set the temperature
dial to MAX.
Step 6
Put the iron on a flat and stable
surface to let it cool down for
at least 30 minutes before
placing it back in its storage.
ENGLISH
12