DANGER OF ELECTROCUTION!
THIS APPLIANCE MUST BE EARTHED. IF YOU NEED TO USE
AN EXTENSION LEAD, IT IS IMPORTANT THAT YOU USE A
MODEL FITTED WITH AN EARTH PLUG.
ENSURE TO CHECK THAT THE VOLTAGE MARKED ON THE
RATING PLATE MATCHES TO YOUR LOCAL SUPPLY. IF NOT
THE CASE, DO NOT USE THE APPLIANCE AND SEEK FOR
EXPERT ADVICE.
TAKE ALL NECESSARY MEASURE WITH CORDS AND
EXTENSIONS TO AVOID ANY INJURIES WHILE IN USE.
NEVER IMMERSE THIS APPLIANCE IN WATER.
FOR YOUR OWN SAFETY, WE RECOMMEND YOU NEVER
LEAVE THE APPLIANCE IN A PLACE THAT IS EXPOSED TO
HUMIDITY OR INCLEMENT WEATHER CONDITION.
NEVER USE APPLIANCE AS AN ADDITIONAL HEATING
SOURCE.
NEVER LEAVE APPLIANCE PLUGGED IN WHEN NOT IN USE.
THE IRON MUST NOT BE LEFT UNATTENDED WHILE IT IS
CONNECTED TO THE MAIN SUPPLY.
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED
BY THE MANUFACTURER, ITS SERVICE AGENT OR
SIMILARLY QUALIFIED TECHNICIANS IN ORDER TO AVOID
A HAZARD. THE SUPPLY CORD SHOULD BE REGULARLY
EXAMINED FOR SIGNS OF DAMAGE AND THE APPLIANCE
IS NOT TO BE USED IF THE CORD IS DAMAGED.
ENGLISH
5