Coway CHP-590L Mode D'emploi page 25

3. After separating the fitting connected to the filter to replace, please
replace the filter. (Separate the fitting using the proper tool.)
When you are replacing filters, please make sure that a corresponding filter
and a hose are firmly connected and that there is no leakage.
It is recommended to empty the water tank filled with the filtered water at
Tips
least one time right after the filter replacement.
4. Please fit the groove of the front cover.
After tightening 1 fixed screw in the front draining part using the Phillips
driver, let down and close the front draining door.
Use new filters only after washing.
- Neo-Sense filter: Install after washing with source water for about 1 minute.
- Membrane filter (RO): Install the main water supply valve and install after
washing with source water for about 5 minutes.
Tips
- Nanotrap filter: Install after washing with source water for about 3 minutes.
- Plus Inno-Sense Filter: Install with no separate flushing.
- Plus Inno-Sense Filter (D): Install with no separate flushing.
▶
▶
23
24