Glacier bay 873-0127H2 Guide D'utilisation Et D'entretien page 12

Adjusting the temperature
5
Reinstall the red limit stop ring
□
Reinstall the red limit stop ring (1) and readjust
the teeth engagement position so that the stem
can not move beyond the adjusted point.
6
Reinstalling the handle,
escutcheon, and inverter
□
Place the inverter (1) onto the valve body (H).
□
Screw the sleeve (2) onto the valve body (H).
□
Place the escutcheon (I) onto the valve
body (H) and secure with the escutcheon
screws (AA).
□
Place the handle (J) onto the inverter (1) and
secure with the handle screw (K), insert the
index (L) into the handle (J).
I
AA
J
L K
12
1
H
2 1