Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SETTING THE VIDEO
CHANNEL
To view playback of a recorded tape, or to watch a
program selected by the VCR's channel selector, the
TV must be set to channel 3 or 4 (video channel).
When a TV is connected with the 75 ohm coaxial cable
only.
1
Turn ON the VCR POWER button.
2
Set the 3/4 Channel selector switch (Rear of the
VCR) to CH 3 or 4.
3
Turn ON the TV and set to CH 3 or 4 to correspond
with the channel selected in 2.
4
Press the TV/VCR selector button to select the VCR
position.
The TV/VCR indicator will light.
5
Select any channel to receive
a TV station in your area.
The channel number will
appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot
be tuned on your TV, proceed as follows: set the VCR 3/
4 channel selector and the TV to CH 3 or 4, play back a
prerecorded tape and tune the TV to receive a sharp
color picture from the video cassette recorder. Refer to
your TV owner's manual for details.
LANGUAGE SELECTION
This VCR can display on the TV screen in the
English, Spanish or French languages.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
1
Press the MENU button.
Press the TRACKING SET +
or – button to select the
LANGUAGE option, then
press the ENTER button.
2
Press the TRACKING SET +
or – button to select the
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
ENTER button.
3
Press the MENU button until the menu screen is
cleared.
SETTING THE CLOCK
You must set the date and time manually for timer
recordings.
EXAMPLE: Setting the clock to "8:30 AM" March, 29
CH 125
(FRI), 2002.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on, and select the video input
mode on the TV.
1
Press the MENU button. Press
the TRACKING SET + or –
button to select the CLOCK SET
option, then press the ENTER
button.
2
Press the TRACKING SET + or
– button to set the month, then
press the ENTER button.
3
Set the day, year and time as in
Step 2.
• The day of the week will
• Press and hold down the
• Auto date and time start
NOTES: • After a power failure or disconnection of the
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
ON
OFF
CH SET UP
SAP
ON
OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/—/ENTER/MENU 〉
automatically appear when
you set the year.
button to increase/ decrease
the minute by 10.
functioning when you finish
setting.
power, the timer settings will be lost. In this
case, reset the present time.
• Press the CANCEL button to move cursor
backward for correction.
• If you want to correct time or date while the
clock is functioning, press the MENU button,
then press TRACKING SET + or – button to
select the CLOCK SET option, then press the
ENTER button.
To make any adjustments perform steps 2
through 3.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
〈+ / – /ENTER/MENU 〉
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
ON
OFF
CH SET UP
SAP
ON
OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/—/ENTER/MENU 〉
4
MONTH
3
DAY
1
(WED)
YEAR
2000
TIME
12
: 00 AM
+ / — /ENTER/CANCEL/MENU
MONTH
3
DAY
29
(FRI)
YEAR
2002
TIME
8
: 30 AM
〈+ / — /ENTER/CANCEL/MENU 〉
1 2
15
Publicité
Chapitres
Table des Matières
