Troubleshooting Tips - NETGEAR GS108E Guide D'installation

Frame filter rate
Frame forward rate
Network latency
(using 64-byte
packets)
Address database size up to 4K MAC addresses
MAC Address
Learning
Queue buffer
NETGEAR Green
features

Troubleshooting Tips

Problem
Power light is not lit
Port number light is
not lit for a
connected device,
or stays on
continuously
English
Performance Specifications
14800 frames/sec max for 10M port; 148,800 frames/sec max
for 100M; 1,488,000 frames/sec max for 1000M port
14,800 frames/sec max for 10M port; 148,800 frames/sec max
for 100M port; 1,488,000 frames/sec max for 1000M port
1000 Mbps to 1000 Mbps: 2.7 μs max.
Automatically updated
192 KB
Auto power-down mode saves energy when ports are unused
Action
The switch has no power. Make sure that:
• The power cord is properly connected to the switch.
• The power adapter is properly connected to a functioning
power outlet. If it is in a power strip, make sure the power strip
is turned on. If the socket is controlled by a light switch, make
sure the switch is in the on position.
• You are using the NETGEAR power adapter supplied with your
switch.
There is a hardware connection problem.
• Make sure the cable connectors are securely plugged in at the
switch and the device.
• Make sure the connected device is turned on.
• If the Ethernet cable is connected to a NIC or other Ethernet
adapter, make sure the card or adapter is installed correctly
and is working.
• Make sure the cable is less than 328 feet (100 meters).
5