5.6.1. Spring preload (front suspension)
The adjustment is obtained from the reference
position, which is found by fully turning the adju-
sting nut counterclockwise; from this position, turn
the screw clockwise until you reach the standard
position (see enclosed table). Rotate clockwise to
increase the spring preload or counterclockwise
to decrease it.
ADJUSTMENTS
5.6.2. Rebound damper (front suspension)
The adjustment is obtained from the reference
position, which is found by fully turning the screw
clockwise; from this position, turn the screw coun-
terclockwise until you reach the standard position
(see enclosed table). Rotate clockwise to increa-
se the damping action or counterclockwise to
decrease it.
- 81 -
5
5