Mark OJ Livret Technique page 4

TEMPERATURE
To change the temperature setpoint for the selected control mode,
press the temperature on the panel's home screen. Change the tem-
perature using the arrows and confirm with the green button.
SETTINGS
OJ-AIR2-HMI-35T is used together with an OJ-Air2 Master, and all communication is via the master.
Some settings can be made via the menu icon in the upper right corner of the home screen.
Begin by pressing the menu icon in the upper right corner of the
home screen. The following screen is then displayed:
Home
Press this icon to return to the home screen.
Communication
Here you can configure LAN settings such as static/dynamic IP and
associated addresses.
4