Bimar MP52 Notice D'instructions page 44

•
If the power cord of the charger is damaged, it must be replaced by the
manufacturer or their technical service, or by a person with similar
qualifications, in order to prevent any risk.
• In order to avoid any risk of electric shock, never immerse the plug, the electric
cord, the battery charger or the scooter in water or any other liquid.
• If the charger is not in use, unplug it from the power outlet.
• Do not touch the charger with wet hands or feet.
• Do not pull on the power cord to disconnect the plug from the charger's power
socket.
• Do not pull on the charger cable to move the scooter.
• Do not charge the battery and use the scooter if the battery starts to emit
odours, overheats or starts to leak. Do not touch any leaking substances or
breathe in the fumes from them. Seek immediate medical attention if you are
exposed to any substance emitted from the battery. The manufacturer cannot
be held responsible for any damage resulting from improper use (such as
tampering with the battery), incorrect and irresponsible use and/or repairs
carried out by unqualified persons.
• When charging the battery, make sure that it does not come into contact with
water or other liquids. If it inadvertently gets wet or is immersed in liquid, first
deactivate the power socket by turning off the switch on the electrical panel,
and only then remove the plug from the power socket. Carefully dry both the
plug and the socket, and only then turn on the power at the socket. Insert the
plug into the power outlet again, and you can then use the appliance. In case of
doubt, contact professionally qualified personnel.
• The power outlet must be easily accessible so that the plug can be easily
unplugged in an emergency.
Battery