Far Group Barracuda 418005 Mode D'emploi page 30

Be sure the total load is within generator rated output otherwise generator da-
!
mage will occure.
OPERATION OF THE POWER GENERATING UNIT
Alternative current (AC)
1- Wind the power lead 2 or 3 turns around handle.
2- Start the engine.
3- Plug into AC socket.
4- Press into the AC protector and turn on teh electric apparatus
N.B : Press to reset the AC protector.
1: «ON» 2: «OFF»
-Be sure all electric apparatuses including the lines and plug connection are in
!
good condition before connection to the generator.
-Be sure electric apparatus is turn off before plugging it in.
-Be sure the total load is within generator rated output.
-Be sure the socket load current is wthin socket rated current.
STOP OF THE POWER GENERATING UNIT
N.B :
Turn off the electric apparatus.
1- Disconnect the electric apparatus.
2- Turn the engine switch to the OFF»
3- Turn the fuel cock lever to «ARRÊT»
Reduce the load to the specified generator rated output if the AC protector turns
!
off. If it turns off again, consult your FARGROUP dealer.
«position
© FAR GROUP EUROPE 2004
GB