GE FUM12 Serie Manuel D'utilisation page 12

Before you call for service...
Problem
Freezer temperature
too cold
Moisture forms on
outside of cabinet
Interior light does
not work
(on some models)
Door/lid won't fully
close by itself
Slow starting time
after being off
Excessive frost
build-up
12
Possible Causes
Temperature control
set too cold.
Not unusual during
periods of high humidity.
No power at outlet.
Freezer is unplugged.
Light bulb burned out.
Legs need adjusting.
Package holding door/lid open.
Built-in overload protection.
Door/lid left open.
Too frequent or too long
door/lid openings.
Not unusual during
periods of high humidity.
What To Do
•See About the operation of your freezer.
•Wipe surface dry.
• Replace fuse or reset the breaker.
• Push the plug completely into the outlet.
•Replace bulb.
• See Preparing to install the freezer.
• Check to see if package is holding door/lid open.