Assembly Preparation - MasterCraft MAXIMUM 068-1221-8 Mode D'emploi

Tall Storage Cabinet-068-1221.book Page 9 Friday, September 6, 2013 1:54 PM
9

Assembly preparation

• Assemble the storage cabinet on a clean, level surface.
• Remove all items from the packaging box and ensure that all parts listed on pages 6-8 are
included.
• When installing parts that have more than one screw, tighten all screws by hand before
tightening them with the screwdriver provided.
Assembly instructions
1. Attach the left panel (Part 1) and right
panel (Part 2) to the top panel (Part 3).
Insert three M4 X 8 screws (Part 19) into
each side of the panels and tighten them
using the screwdriver (Part 21)
Note: Make sure the front of the cabinet frame is
facing down. Once the cabinet frame is
assembled, turn the cabinet frame to the upright
position to attach the back panels.
Note: As the cabinet frame is assembled upside
down, use carpet or blanket while assembling
the cabinet so that cabinet front does not get
scratched.
2. Attach the left panel (Part 1) and right
panel (Part 2) to the bottom panel
(Part 4). Insert three M4 X 30 screws
(Part 20) into each side of the panels and
tighten them using the screwdriver
(fig B) .
(fig A)
.
STORAGE CABINET 068-1221-8
fig A
19
3
2
MC-681221-02
fig B
1
20
2
MC-681221-03
21
1
4