Assembly Preparation - MasterCraft 068-1226-8 Guide D'utilisation

ASSEMBLY PREPARATION

• Assemble the storage cabinet on a clean, level surface.
• Remove all items from the packaging box and ensure that all parts listed on page
3 are included.
• When installing parts that have more than one screw, tighten all screws by hand
before tightening them with the screwdriver provided.
ASSEMBLY INSTRUCTIONS
1. Place the right panel (3) to the
right side of the top panel (6). Line up
screw holes of both the panels. Insert
three M4 x 8 screws (11) into the
screw holes and tighten them using
the screwdriver (17) (see Fig. A).
2. Place the left panel (2) to the left
side of the top panel (6). Line up the
screw holes of both the panels. Insert
three M4 x 8 screws (11) into the
screw holes and tighten them using
the screwdriver (17) (see Fig. B).
3. Attach the bottom panel (1)
between the left panel (2) and the
right panel (3). Line up the screw
holes of all the panels. Insert three
M4 x 8 screws (11) into the screw
holes on each side of the bottom
panel and tighten them using the
screwdriver (17). Cabinet frame is
assembled (see Fig. C).
Fig. A Fig. A
Fig. B Fig. B
Fig. C Fig. C
4