MasterCraft MAXIMUM 068-1221-8 Mode D'emploi page 11

Tall Storage Cabinet-068-1221.book Page 10 Friday, September 6, 2013 1:54 PM
3. Attach the bottom back panel (Part 10),
middle back panels (Part 9) and upper
back panel (Part 8) to the assembled
cabinet frame. Starting from the bottom
back panel, insert the M4 X 8 screws
(Part 19) into the screw holes of all the
back panels and tighten them using the
screwdriver (fig C) .
Note: Two screw holes for corner protectors
are reserved across the top panel and the
bottom panel.
4. Install the leveling feet (Part 24) on the
bottom panel (Part 4) using the wrench
(fig D)
(Part 25) .
5. Turn the cabinet frame to the upright
position.
6. Choose the desired height for placing
each middle shelf (Part 5) inside the
cabinet. Then pull down the hooks (Part
13) into the hook slots provided, making
sure the four hooks are placed at the
same height. Place the shelves into the
cabinet frame and press them down
(fig E)
onto the hooks
7. Attach one of two magnets (Part 23) to
the top panel (Part 3) and another
magnet to the bottom panel (Part 4).
Insert two M4 X 8 screws (Part 19) into
each magnet and tighten them using the
(fig F)
screwdriver .
fig C
8
fig D
fig E
.
fig F
23
19
STORAGE CABINET 068-1221-8
19
9
10
MC-681221-04
25
4
24
MC-681221-05
13
5
MC-681221-06
3
4
MC-681221-07
10