Teac NS-X1 Manuel Du Propriétaire page 27

Alarm
You can set the alarm timer to turn on the unit at the set time. The
alarm function can be used only when the clock time setting is
completed.
For detailed information, see "Clock" on the previous page.
Setting the alarm timer for the first time
1
From the "Settings" menu, select "Alarm".
N e t w o
C l o c
> A
l a r m
2
Set the time you want the unit to turn on.
0 0 : 0
Press the UP or DOWN (
o
(01 to 24) and minutes (00 to 59), and then press the ENTER
button after selecting each item.
3
Select an input source to be turned on.
You can select iPod or FM by pressing the UP or DOWN
o
(5 or b) button.
Make sure that the selected input source is playable.
o
4
Set the volume to a value from 00 to MAX (50), and then
press the ENTER button.
Press the UP or DOWN (
o
volume setting.
After setting the volume, the display changes as follows:
o
Time w Input source w Volume.
You can also check the alarm setting by pressing the ALARM
o
button on the remote control.
After the alarm setting has been turned on, you cannot
o
change it by pressing and holding the ALARM button on the
remote control.
r k
k
0
5 or b) button to change the hour
5 or b) button to change the
5
The following menu screen will appear.
> O n / O f
S e t t
The icon will appear, showing that the alarm is set.
o
Press the UP or DOWN ( 5 or b) button to move up or down
o
the menu, and then press the ENTER button to select a menu.
You can select "On/Off" to turn the alarm on or off.
o
You can select "Setting" to reset the alarm settings as
o
1
instructed in steps to
Press the HOME button to exit the menu.
o
You can access the above menu by pressing and holding the
o
ALARM button except when the alarm setting is turned on.
Sleep
You can set the sleep timer to automatically put the unit into standby
after the set time.
Setting the sleep timer
Simply press the SLEEP button on the remote control.
Each time you press the SLEEP button, the message changes as follows:
Sleep Off w 120 w 90 w 60 w 30 w 15
S l e e p
After setting the sleep timer, you can check or change the remaining
time from the "Settings" menu.
While the sleep timer setting is turned on, the
display.
f
i n g
4
.
9 0
icon is shown on the
27