16. Retighten the top panel
screws using a screwdriver
Reversing the door for appliance with 2 doors.
Dismount the middle hing pin
and bushing.
Dismount the door
Cover for hinge hole is dismounted
an remounted in opposite site.
Adjustment of the door.
Mounting of lock
for appliance
with 2 doors.
(Optional extra.)
Operator's guide
17. Refit the lock housing
and lock pin.
Mounting of lock for appliance
with 1 door. (Optional extra.)
9
18. After reversing the door,
it is important to check that the
sealing strip provides a tight
seal all the way round.
If it does not, carefully heat the
strip all the way round using
a hair dryer. Then ease the strip
outwards slightly so that it
forms a tight seal against the
cabinet. Be careful not to heat
the strip so much that it melts!
VKG 581:
SHOULD THE HINGE
REVERSING THE DOOR
CVKS pag. 22
I
UK
D
E
F
NL
P
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO