Samsung RF261B Serie Mode D'emploi page 8

3.
Pull and remove the hinge lever (
the ground screw ( 4 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
( 5 ).
3
5
4.
Lift the door straight up to remove.
5. Remove the screw (
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 7 ) attached to the lower left and right door
hinges with an allen wrench (3/16"). Remove
the lower left and right door hinges ( 8 ).
DISASSEMBLE ThE FLEx DOOR
1. Take out the upper drawer by lifting it up.
08_ setting up
DA68-02601B(EN+ES+FR)-0.0.indb 8
3 ) . Remove
4
6 ) attached to the
8
6
7
Allen wrench
2. Take out the lower basket (
basket up from the rail system.
3. Press the fixing hook of rail system.
4.
After holding and pulling out the top of Freezer
Door, remove it at the rail system.
Make sure there is no scratch at the end of
Sliding Rail by being dented from the floor.
CAUTION
Make sure that you mount the freezer
basket in the right position when removing
CAUTION
/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.
Do not overload the bottom basket or
the top drawer. Overloading prevents the
Freezer drawer from closing properly and
will eventually cause frost build-up.
1 ) by lifting the
1
2012.3.29 9:28:39 AM