Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Aux in
Use the Aux in port to connect any audio device to your speaker with a 3.5mm jack cable.
The speaker will automatically switch to Aux mode when the cable is connected and the light ring will
change to purple colour.
Wi-Fi reset
• If you need to set your speaker up to a new Wi-Fi connection, simply press and hold the Time set
button (5) for 5 seconds and the Wi-Fi SSID will be reset and you can connect to a new Wi-Fi, signal.
Factory reset
• If you have any problem with your speaker, you can use the reset switch. Use a thin object to press
the button inside the reset hole. Hold for 10 seconds to complete the reset.
Connecting your speaker to the network
Connecting with the Smartaudio app
1) Search for the Smartaudio app in Google Play Store (Android)
Or Apple APP Store (iOS). Download and install.
Also ensure that you have also installed the official Amazon Alexa app.
Check the full set up instructions at
https://urlz.fr/aMWu
- EN 5 -
Publicité
Table des Matières
