Assembling Cleaner - Hoover Lightweight Commercial Cleaner Mode D'emploi

Assembling cleaner

It is extremely important to read and
follow all instruction steps in order.
The assembled cleaner will look like this drawing.
STEP 1 Unpack carton
1
A
B
E
Remove all parts from carton and identify each
item shown.
Make sure all parts, especially small items, such as G
and H, are located before disposing of cardboard
packing.
2
D
C
G
F
H
A.Upper handle
1
B.Lower handle
C. Cleaner body
D. Outer bag
E. Cord
F. Filter bag
G.Handle bolt and nut packet
(One extra nut included)
H. Extra belt (One installed on cleaner)