Configuration - Ksenia porta IoT KSI4300002.300 Manuel D'installation

INSTALLATION
porta IoT is connected to the control panel via LAN through ethernet port.
It can be powered by PoE or by external power pubbly (12/24Vdc).
It is supplied with a plastic box that occupies 4 DIM modules.
Only one porta IoT per lares 4.0 is supported and as an alternative to porta 4.0 (Gateway KNX).

CONFIGURATION

Configuration of porta IoT (identified by MAC Address uniquely) and Gateway Http service is realized
through the control panel web interface. Gateway Http service provides the programming of Http/s
messages that the lares 4.0 control panel and the connected third-party resources exchange through the
IoT port.
IT
Gateway Http service requirements:
• register the control panel on Ksenia SecureWeb;
• start "Installer" configuration program from Ksenia SecureWeb;
• first time you enter the configuration page, click <ACTIVATE THE SERVICE>.
Detailed information about how to configure porta IoT is contained in the "lares 4.0 programming
manual".
Only one porta IoT per lares 4.0 can be configured and as an alternative to porta 4.0 (Gateway KNX).
COMPLIANCE
Europe - CE, RoHS
Technical specifications, appearence, functionality and other product characteristics may change without notice.
EN
5
3