Description Of The Product - Ksenia porta IoT KSI4300002.300 Manuel D'installation

EN
INTRODUCTION
porta IoT allows thousands of different and third party IoT devices to communicate with Ksenia lares 4.0
control panels in a simple and immediate way by avoiding integrations via SDK, in many , in so many cases
of use. In fact, the http/s API exposed thought porta IoT allow the following functions (for example): include/
exclude/put in alarm/restore the zones, handling monostable/bistable outputs, running a scenario, etc., by
handling POST, PUT, GET and DELETE requests. Also the way the lares 4.0 control panel sends http/s type of
requests through porta IoT module when an event occurs is the same and the requests are configured as
required by the device to be controlled.
Furthermore, porta IoT increases the integration security as it can supervise IP devices from which it accepts
http/s requests and as it requires a specific token for APIs.

DESCRIPTION OF THE PRODUCT

-
+
RESERVED
porta
GATEWAY HTTP
12/24Vdc
150 mA
-
+
MENTAZIONE
Power supply
-
+
TECNICAL CHARACTERISTICS
• Power supply: 12/24Vcc or PoE
• Consumption: 5W max
• Prepared with BUS485 for future use
• Ethernet interface: RJ45
• Operating range of temperature: +5°C to +40°C
• Dimensions: 86x69x58mm
• Weight: 130gr.
COMPATIBILITY
porta IoT is compatible with lares 4.0 control panels firmware version 1.67.XX and later.
4
GND B A
FUTURE USE
IoT
LAN
PoE
Made in Italy
ETH
port
+V -V
Terminal descriptions
+
Positive power supply terminal
-
Power supply Negative terminal
Ground power supply
ETH port LAN RJ45 Connector
PoE