Oster 078006 Mode D'emploi page 5

TAKING CARE OF YOUR CLIPPER
Note: Any other maintenance not explained in this manual must be performed by an
Oster™ Authorized Service Center.
Important: Make sure clipper is turned off and unplugged from electrical outlet before
removing, replacing or cleaning any part.
Removing Blade Assembly from the Clipper
Push locking button
v
upwards to position
forward and upwards at
When pushing the blade assembly back into the clipper it must be inserted
WARNING
with the smooth side of the blade facing upwards. If the blade is not
positioned with the correct side facing upwards, damage to the clipper or
injury may result.
u
(078006 Model ONLY) in and hold. Push blade assembly
w
. Blade assembly can now be removed from clipper by pulling
x
. before removing, replacing or cleaning any part.
078006 Model ONLY
Step 1
- English-5 -