MasterCraft 068-1226-8 Guide D'utilisation page 6

5
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-1226-8 | contact us 1-800-689-9928
4. Place the lower back panel (4) and
the upper back panel (5) onto the
cabinet frame. Line up the screw holes
of all the panels. Insert 20 M4 x 8
screws (11) into the screw holes and
tighten them using the screwdriver (17)
(see Fig. D).
5. Place the cabinet frame in an
upright position. Attach one of two
magnets (15) to the top panel (6) and
the other magnet to the bottom panel
(1) by screwing two M4 x 8 screws (11)
into each magnet (see Fig. E).
Note:
The black plate of the magnet (15)
should be facing the front.
Note:
Decide the height for the middle shelf.
6. Insert four hooks (16) into the hook
slots provided at side ends of the
cabinet frame at the decided height.
Then, place the middle shelf (7) into
the cabinet frame and push it down
onto the hooks to lock it. Follow the
same procedure for attaching the other
middle shelf into the cabinet frame
(see Fig. F).
Note:
When placing the hooks, make sure they
are at the same height.
headline bars headline bars headline bars headline bars
Fig. D
continuation tabs continuation tabs continuation tabs continuation tabs
notes notes notes notes
Fig. E
warnings warnings warnings warnings
Fig. F