X32 Setup - Behringer X-ADAT Guide De Démarrage Rapide

X-ADAT ➝ external automixer ➝ return to X-ADAT
•
Out 1-8 and 9-16 to Auto-mixing Processor inputs
•
In 1-8 and 9-16 from Auto-mixing Processor outputs
•
Routing/home > Input 1-16 = Card In 1-16,
Routing/card out > Output 1-16 = Local 1-16
VIEW
VIEW
VIEW VIEW VIEW VIEW VIEW
– 6
10 10 10
5 5 5
0 0 0
– 5 – 5 – 5
–10 –10 –10
– 20 – 20 – 20
– 30 – 30 – 30
– 40 – 40 – 40
– 50 – 50 – 50
– 60 – 60 – 60
– 0 0 – 0 0 – 0 0
Behringer X32

5. X32 Setup

Word clock I/O selector:
•
either word clock slave (input), allowing the console to sync
to external WC devices or
•
word clock master (output), providing system word clock to
other devices
X-ADAT card can be selected as the clock source on the X32 Setup/
config page. In this case, the X32 will be slaved to the ADAT clock
received on BNC input or fiber optic Toslink inputs. Note that this
may require the console to be rebooted if the internal and external
clock rates are different (i.e. 44.1/48 kHz).
VIEW VIEW
VIEW
VIEW Auto mixer
Note, this would also apply for any other sort of specialized
outboard processing that features ADAT I/O. It can be used for
all 32 x 32 channels simultaneously, even spread over several
external processors.
Coaxial
Wordclock
Word clock selection box for choosing the external clock
synchronization source:
•
fiber optic inputs 1-4 or
•
coaxial BNC WC input
•
local clock indicates the X32 console's internal clock.
13
Quick Start Guide