Troubleshooting; Warranty - PowerSmith PGT120 Manuel De L'opérateur

STORING THE TRIMMER
•
Open telescoping shaft coupler and set at shortest setting.
•
Clean all foreign material from the trimmer.
•
Store it in a place that is inaccessible to children.
•
keep away from corrosive agents such as garden chemicals and de-icing salts.
ACCESSORY AND REPLACEMENT PARTS
Replacement Spool Part Number ................... PASTS165, PASTS165-2
Replacement Spool Cap Part Number ............. ZPGT120P43
PROBLEM
Line will not advance when
using the Auto-Feed.
Line wraps around drive
shaft housing and line head.
Motor fails to start when
trigger is depressed.
This product is warranted free from defects in material and workmanship for 3 years after date of purchase. This limited
warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered
by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call Toll-Free
Help Line for possible solutions.
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 3 YEAR WARRANTY.
BATTERY INCLUDED IS WARRANTED FOR ONE (1) YEAR AFTER DATE OF PURCHASE.
For questions about this or any other PowerSmith Product,
888-552-8665
Please call Toll-Free:
www.powersmithtools.com
Or visit our web site:
English
MAINTENANCE

TROUBLEShOOTINg

POSSIBLE CAUSE
Lines are welded to themselves.
Not enough line on spool.
Lines are worn too short.
Lines are tangled on spool.
Cutting tall grass at ground level.
Battery is not secure.
Battery is not charged.

WARRANTY

.
13
SOLUTION
Lubricate with silicone spray.
Install a new spool or line. Refer to Spool
Replacement in this manual.
Manually pull line- Refer to Manual Feeding
the Cutting Line.
Rewind the line-Refer to Line Replacement.
Cut tall grass from the top down to prevent
wrapping.
To secure the battery pack, make sure the
latches on the top of the battery pack snap
into place.
Charge the battery pack according to the
instructions included with your model.