Operating Features; Data Hold Feature - IDEAL 61-337 Manuel D'utilisation Et De Sécurité

Operating Features

High Voltage Warning (HI-V)
The meter beeps once (for 1 second) and a red LED illuminates and remains on as
long as the voltage remains above 30V AC or DC, or when the meter's voltage range
is exceeded.
NOTE: This feature does not work in the Ohm, capacitor, continuity or amperage
modes.

Data Hold Feature

Press the Hold button to toggle in and out of the data hold mode. "H" appears in the
upper left of the meter display when data hold is active. Use the data hold feature to
lock a measurement reading on the display. Press the Hold button again to unlock
the display and obtain a real-time reading.
∆
REL Feature ( )
∆
A short press of the ' ' button will activate or deactivate the REL function.
Range
The meter is auto ranging, however the user may select a specific range by pressing
the range button repeatedly.
Auto Power Off (APO) Feature Disable
The meter automatically powers itself down after about 30 minutes of no use. Press
any button, and the meter will wake up and enter the default function of that setting
before power down. To Disable APO, press and hold the SEL button while turning
the dial to any desired function. When APO is defeated, the "APO" will be removed
from the display. Turning the meter off and back on will restore the APO default.
10