Grass Trimmer
Maintenance
Before any work on the machine itself, remove
battery from machine.
Note: To ensure long and reliable service, carry out the
following maintenance regularly.
Regularly check for obvious defects such as loose fixings,
and worn or damaged components.
Check that covers and guards are undamaged and correctly
fitted. Carry out necessary maintenance or repairs before
using.
If the trimmer should happen to fail despite the care taken
in manufacture and testing, repair should be carried out by
an authorized customer service agent
Use only identical spare parts for repairing a tool.
Caution! If there's any defective found of the battery pack, it must be repaired or replaced by the assigned
service organization.
Environmental Protection
This product is marked with the selective sorting symbol on waste electrical and electronic equipment. This means
that this product should not be disposed of with household waste but must be supported by a collection system in
accordance with Directive 2012/19/UE. It will then be recycled or dismantled to minimize impacts on the
environment, electrical and electronic products are potentially hazardous to the environment and human health due
to the presence of hazardous substances.
EN
INSTRUCTION MANUAL
After trimming / storage
Stop and remove battery from product. Ensure
battery is removed before storage.
Clean the exterior of the machine thoroughly using a soft
brush and cloth. Do not use water, solvents or polishes.
Remove all grass and debris, especially from the ventilation
slots.
Turn the machine on its side and clean the cutting guard
inside. If grass cuttings are compacted, remove with a
wooden or plastic implement.
Battery should be stored between 0 – 45°C; incorrect
storage could result in the battery being damaged.
Store it out of reach of children.