Stadler Form Lucy Mode D'emploi page 21

Note: If you would like to change the fragrance, empty Lucy completely and
clean the water container with a damp cloth. Fill Lucy once again and pour the
drops into the device following the instructions.
Cleaning
Prior to any maintenance and after each use, switch off the appliance and dis-
connect the USB cable (1) from it.
Careful: Never immerse the device in water (danger of short circuit).
• Regularly as required: To clean the outside, rub with a damp cloth and then
dry thoroughly.
• If there are marks caused by water and/or fragrances on the top of the lid
(10), clean it with a damp cloth and a squirt of washing-up liquid. Then dry
the lid thoroughly before using the appliance again.
• Internal cleaning: You can clean the ultrasonic membrane with a con-
ventional household descaler. If there are lime deposits, we recom-
mend that you use Stadler Form Cleaner & Descaler (www.stadle-
rform.com/accessories). Alternatively, you can use a household
descaling agent or vinegar. Please do not try to scratch off deposits
from the membrane with a hard object. For stubborn deposits, we
recommend that you descale the device several times in a row. After the
descaling rinse the base and then dry thoroughly.
• No water may enter the air outlet opening (9). This will damage the appli-
ance and will void any claim to the warranty.