Blue 43BU800 Mode D'emploi page 26

Menu Operation
• HDMI EDID (In HDMI mode): Switch EDID Version, Select Enhanced when source
signal is transferred by HDMI2.0 specification and Select Standard when source
signal is transferred by HDMI1.4 specification.
• Environment: You can select Home or Store for the TV environment. It is
recommended to set the TV to Home Mode.
• Restore Factory Default: Restore the system settings to the factory default. When
the restore is complete, the TV will enter standby mode.
■ PVR File System (In DTV mode):
PVR Function Operation Instruction
 Preparing
 Plug USB flash drive or USB hard disk into USB slot on
the TV set.
NOTE:
• USB disk should have capacity at least 512MB.
• USB device must support USB 2.0 high-speed
specification.
• Use only USB storage devices formatted with FAT32.
 Select a digital channel, the PVR function can only be
used in DTV mode;
 Then press MENU ( ) button on the remote to bring the
main menu up, press arrows button to highlight Option
menu, and then press the OK button;
 Press ▲/▼ buttons to highlight PVR File System (In DTV mode), then press OK
button to go into submenu.
 Setting
– Select Disk: Select a disk used for PVR.
NOTE:
• Some models have two USB input and several disk can be used when two USB
devices are plugged in.
– Format Start: Format USB disk.
NOTE:
• Before formatting, please back up all important files.
• During the device formatting, do not disconnect the device or turn off the power. If
your USB device can't be formatted or fail to be checked by the system, it means
the device isn't compatible with the TV or is damaged. The larger USB device will
take longer time to format please be patient until the formatting finishes.
– Speed Check: Press OK to check the speed of the storage device.
– Record List: Shown the list of recorded programs.
– Time Shift Size: You can select the memory size for Time Shift function.
 Recording
There are two types of recording: Instant Recording and Schedule Recording.
25