Blue 43BU800 Mode D'emploi page 16

Menu Operation
Configuring the Channel Menu
• Antenna Type: Selecting an antenna source.
※ When TV signals is Air.
• Auto tuning: Press the OK button to enter sub-menu.
– Tune Type: Press the ▲/▼ button to select tune type:
DTV+ATV, DTV, ATV.
– Country: Press the ▲/▼ button to select country.
– Scan Mode: Press the ▲/▼ button to select the scan
mode.
– Service Type: Select the service type to search.
– LCN: Select the LCN functions On or Off.
– Search: Press the OK/► button to start the auto
searching.
Once the progress bar is full, the found channels will be
stored and the unit will proceed to the search for DTV,
ATV, Radio and Data.
If you press the
searching as the suggestive picture shows.
• DTV Manual Tuning: Manual store for digital
channels.
1. Press the ◄/► button to select channel, Scan
Mode and Service Type.
2. Press the Select button to start channel tuning.
When a channel is found, the searching process
will stop; the channel will be saved with current
channel number. Press the EXIT (
※ When TV signals is Cable.
• Auto tuning: Press the OK button to enter sub-menu.
– Tune Type: Press the ▲/▼ button to select tune type: DTV+ATV, DTV, ATV.
– Operator: Press the ▲/▼ button to select Operator.
– Country: Press the ▲/▼ button to select country.
– Scan Mode: Press the ▲/▼ button to select the scan mode.
– Service Type: Select the service type to search.
– LCN: Select the LCN functions On or Off.
– Scan Type: Press the ▲/▼ button to select Full SCAN or Quick SCAN.
• If you select Full, the Auto Tuning will search through all frequencies to find
available channels.
• If you select quick, the Auto Tuning will search through appointed frequencies to
find available channels.
– Frequency: Press the◄/►button to select Frequency: Auto or enter digital
numbers.
– Network ID: Press the◄/►button to select Network ID: Auto or enter digital
numbers.
– Symbol: Press the◄/►button to select Symbol Rate: Auto or enter digital
numbers.
button in TV searching, the Auto Tuning will skip to ATV
MENU ( )
VHF CH
Scan Mode
Service Type
Frequency
) button to exit.
15
Channel
Setting /
Antenna Type
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Dynamic Rescan
Programme Edit
CI Information
Signal Information
DTV Manual Tuning
< 5 >
DTV
< All >
Radio :
< All >
Data
17750KHz
Weak or No Signal
Quality
Search Strength
Air
: 0 Programme(s)
0 Programme(s)
: 0 Programme(s)