Geberit RS485 Instructions De Montage page 13

Element Status
Buzzer
1)
On
Off
<Test> Press the
button button
1) The buzzer can be suppressed by pressing the
<Test> button. If the malfunction continues for
longer than 24 hours, the buzzer will
automatically reactivate.
Maintenance work and the
replacement of components are
described in the maintenance
manual 966.709.00.0.
To diagnose malfunctions, use the
Geberit SetApp.
B1208-001 © 10-2014
966.716.00.0 (00)
Meaning
Malfunction,
diagnose with
Geberit SetApp
Normal operation
Test solenoid
valves
If Bluetooth
interface is active:
disconnect
connection
In the event of a
malfunction:
suppress buzzer
Information
Backwards compatibility of
the control unit
The control unit for Geberit sanitary flush
units from year of manufacture 2015 is
backwards-compatible.
When the control unit is used with Geberit
sanitary flush units through year of
manufacture 2014, the following
information is important:
• the Geberit Service Handy can no longer
be used. Commissioning and malfunction
diagnosis are completed using a
smartphone on which the Geberit SetApp
is installed
• the connection cables for the solenoid
valves and power supply are compatible
• the interfaces to the building service
management system (RS485, digital I/O)
are not compatible. See Document
966.714.00.0 for a description of the
interfaces
EN
13