Hama CM-2020 AF Mode D'emploi page 6

g Operating Instruction
g Operating Instruction
Package contents:
• CM-2020 AF webcam
• CD-ROM with a comprehensive software
package
• Operating instructions
Webcam description
Clamping base
System requirements:
• Pentium P4 CPU with 1.2 GHz or higher
• 256 MB RAM or higher
• At least 500 MB free hard disk storage
space
• CD-ROM drive
• Windows XP Service Pack 2 /
Windows Vista / Windows 7
Webcam installation
Clamp the webcam on your notebook screen.
Thanks to USB video class technology,
the driver installation that was previously
required is no longer necessary.
Insert the USB plug of the webcam into a free
USB 2.0 port on your notebook with Windows
XP Service Pack 2, Windows Vista or Win-
dows 7 and wait a moment until the operating
system detects the device.
Note:
• If your operating system is Windows XP
Lens
Software installation
• Insert the CD-ROM. The start screen
Microphone
• If the start screen does not appear, open
• Select the desired language and then
• Follow the instructions on the screen.
After installing the hardware and software,
open ArcSoft Webcam Companion 3.
Depending on the location, time of day and
lighting, the colours may not be refl ected
realistically or the brightness may need to be
adjusted. If this is the case, use the webcam
settings in Webcam Companion 3 to adjust
the colour settings for your conditions.
but you have not yet installed Service
Pack 2, download the service pack from
Microsoft's website and install it before
you plug in the webcam.
automatically appears after a few seconds.
Windows Explorer and run the
"autorun.exe" application from the
CD-ROM.
install the "Hama Webcam Suite"
software package.
5