Locating A Hot Or Cold Spot - Amprobe IR-710 Mode D'emploi

Button
°C °F
MAX
MIN
�
Laser
To avoid injury, do not point the laser directly at eye or
indirectly off reflective surfaces.
The thermometer is equipped with a laser used for aiming
purposes only. The laser turns off when the trigger is released.
To enable or disable the laser:
1. Press button to enable or disable the laser. Symbol appears
on the display when laser is enabled.

Locating a Hot or Cold Spot

To find a hot or cold spot, aim the Thermometer outside the
target area. Then, slowly scan across the area with an up
and down motion until you located the hot or cold spot.
Description.
Toggle between Celsius and Fahrenheit.
Toggle between MAX and MIN
options. MAX or MIN reading is
displayed on the secondary display.
Turn off or on the laser.
Turn off or on display backlight.
5