Installation; Equipment Description; Installing Dealer/Contractor Responsibilities; Cold Weather Kit - Rheem GEN12AD-V Manuel D'installation

Installation

Equipment Description

This product is only for use as an optional generator system
which provides an alternate source of electric power and
to serve loads such as heating, refrigeration systems, and
communication systems that, when stopped during any
power outage, could cause discomfort or inconvenience.
NOTICE This product does NOT qualify for either an
emergency standby or legally required standby system as
defined by NFPA 70 (NEC).
automatically supply illumination, power, or both, to
designated areas and equipment in the event of failure
of the normal supply. Emergency systems may also
provide power for such functions as ventilation where
essential to maintain life, where current interruption
of the normal supply would produce serious life
safety or health hazards.
intended to automatically supply power to selected
loads in the event of failure of the normal source
which could create hazards or hamper rescue or fire-
fighting operations.
Every effort has been made to ensure that information in this
manual is accurate and current. However, we reserve the
right to change, alter, or otherwise improve the product and
this document at any time without prior notice.
Only current licensed electrical and plumbing professionals
should attempt home generator system installations.
Installations must strictly comply with all applicable codes,
industry standards, laws and regulations.
Owner Responsibilities
operator's manual.
and using your generator, as specified in the operator's
manual.
maintained indoors according to the manufacturer's
instructions/recommendations. Smoke alarms cannot
detect carbon monoxide gas.
indoors according to the manufacturer's instructions/
recommendations. Carbon monoxide alarms cannot
detect smoke.
If you have questions about intended use, ask your installer
or dealer or call 877-369-9400 between
8:00 AM and 5:00 PM CT.
ver, ver, we
improve th improve the
out prior n out prior noti
cal and plum cal and plum ng professio professio
or syst or syste installations nstallation
th all applica h all applica codes, codes,
ions. ions.

Installing Dealer/Contractor Responsibilities

compatible with the generator.
installation and start-up manual.
codes, industry standards, laws, and regulations.
maintenance and servicing.

Cold Weather Kit

If operating the generator below 40°F (5°C), it is HIGHLY
RECOMMENDED that a Model 6030A Cold Weather Kit
(includes oil warmer and battery warmer) be installed. These
items are available at your local servicing dealer.
If you need more information on this matter, please call
(877) 369-9400, between 8:00 AM and 5:00 PM CT.

Unpacking Precautions

The unit is shipped bolted to its mounting pad, ready
for installation. Avoid damage from dropping, bumping,
collision, etc. Store and unpack carton with the proper side
up, as noted on the shipping carton.

Delivery Inspection

After removing the carton, carefully inspect the generator for
any damage that may have occurred during shipment.
If loss or damage is noted at time of delivery, have the
person(s) making delivery note all damage on the freight
bill and affix his signature under the consignor's memo of
loss or damage. If loss or damage is noted after delivery,
separate the damaged materials and contact the carrier
for claim procedures. Parts damaged in shipping are
not warranted.
40°F (5°C)
7