Confi Guration Wizard - CHAFFOTEAUX EXPERT CONTROL Mode D'emploi

technical area
GB
14 Zone 4 Parameters
15 Zone 5 Parameters
16 Zone 6 Parameters
17 HP System Parameters
19 Connectivity
Select the relevant menu and press the OK
button.
Turn the knob to set or view the value. Press
the OK button to confi rm.
Press the back button "
previous screen.
In order to facilitate the parameter setting
procedures, without accessing the complete
Menu, confi guration can take place via the
"Guided confi guration" menu.
Turn the knob and select:
- CONFIGURATION WIZARD
Press the OK button.
Turn the knob and select one of the devices
displayed.
- Solar Control (where present)
(follow the instructions provided in the
solar documentation)
- Energy Manager (where present)
(follow the instructions appearing in the
heat pump system documentation)
- Boiler
- ...
Turn the knob and select:
- Boiler
Press the OK button.
Turn the knob and select:
- Confi guration parameters
- Guided procedures
- Test mode
- Service options
Turn the knob and select:
- Confi guration parameters
(used to view and set the essential param-
eters for correct boiler operation)
82
Press the OK button.
Turn the knob and scroll through the param-
eters to be set:
- Gas parameters
- Setting
- Visualization
- Zone
Press the OK button to confi rm.
Press the back button "
previous screen.
" to return to the Turn the knob and select:
- Guided procedures
(guided procedures are a valuable aid in set-
ting boiler parameters. Turning the knob al-
lows selection of the list of procedures ex-
plaining - step-by-step - how to perform
the confi guration correctly.)
Press the OK button.
Turn the knob and scroll through the param-
eters to be set:
- System fi lling
- System air purge
- Exhaust turnes analysis
Press the OK button to confi rm.
Press the back button "
previous screen.
Turn the knob and select:
- Test mode
(This mode allows for controlling the correct
operation of the system components)
Press the OK button.
Turn the knob to scroll the list of visualised
components.
Press the OK button to confi rm.
Press the back button "
to the previous visualisation.
Turn the knob and select:
- Service option
(This mode allows for storing the technical
assistance centre data and maintenance no-
tices)
" to return to the
" to return to the
" twice to return