Heating Hot Water Settings - CHAFFOTEAUX EXPERT CONTROL Mode D'emploi

heating hot water setting
GB
To access the heating settings, press the OK
button.
Turn the knob and select:
- Complete menu
Press the OK button.
Turn the knob and select:
- CH settings
Press the OK button.
To set the fl ow temperature, turn the knob
and select:
- CH Setpoint temperature
Press the OK button.
The display screen shows:
- T set Z1
- T set Z2
- T set Z3
Turn the knob and select:
- T set Z1
Press the OK button.
Turn the knob and set the fl ow temperature
for the selected zone.
Press the OK button to confi rm.
Repeat the above procedure to set the fl ow
temperature for the other zones, if applica-
ble.
Press the back button "
- S/W Changeover
allows the activation of the heating de-
mand, when the outdoor temperature
drops below the temperature set by the
parameter "S/W temperature threshold "
setting a time delay on the switching with
the parameter "S/W delay time", or the
interruption of the heat demand when
the outside temperature rises above the
set temperature).
70
" twice.
Change heating hot water temperature
Turn the knob and select:
- Zone1
- S/W function activation
(Start up the function for zone 1)
- S/W temperature threshold
(External temperature switching th-
reshold for the activation / deactivation
of the heat demand)
- S/W delay time
(Switching delay for the activation / de-
activation of the heat demand when the
outside temperature get to the set tem-
perature)