6. Daily Maintenance and Product Repair
6. 1 Daily maintenance
a) Properly set the temperature and humidity for a cozy environment, avoid overheating or
excessive cooling.
b) Don't put obstacles before the air inlet and outlet of the heat pump, or the efficiency of
the heat pump will be reduced, even heat pump stopped.
c) Don't put your hand or the stick into inlet or outlet, do not remove the fan mesh,
otherwise the running fan might cause damage to you.
d) Don't use or store combustible gas or liquid such as thinners, paint and fuel to avoid
fire.
e) Do not rinse the machine directly with water. It is recommended to use household
neutral detergent or water to do cleaning. It is strictly forbidden to use volatile oil,
gasoline, thinner and other substances.
f) Please clean the swimming pool and filtration system regularly to avoid damage to the
unit due to filter clogging.
g) Without using in the winter, the power switch must be disconnected; unscrew the inlet
pipe to clear the water inside the machine.
h) Please check regularly the screws for looseness, check whether the wires are worn or
not, and whether the connections are secure.
6. 2 Product Repair
a) In case of abnormal conditions (abnormal noise, odor, smoke, electric leakage, etc.),
please cut off the power immediately, then contact your local dealer, and inform the
product model and fault details. It must be repaired by a professional. Do not disassemble
and repair it yourself to avoid any danger!
b) Before detecting and repairing the machine, you must confirm that the machine has been
turned off and disconnected from the power supply; when opening the cover of the
electrical box, it must be confirmed that all the indicators in the electrical box have been
extinguished before operation
12