Condensate Water - habitat et jardin Mini Comfort Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
4) Check that the set temperature is appropriate
Depending on the initial temperature of the pool water and the air temperature, it may take
several days to heat the water to the desired temperature. A good swimming pool cover can
greatly reduce the time required.
Time delay - the heat pump has a built-in 3-minute start delay (only started when heated) to
protect the circuit and avoid frequent switches causing losses. The machine will restart
automatically after the delay period. Even a brief power outage can trigger this delay and
prevent the machine from restarting immediately. Power on and off during this delay does not
affect the 3-minute duration of the delay.

1.5 Condensate water

The air entering the heat pump is strongly cooled when heat pump heat the pool water,
which may cause condensation of the evaporator fins. At higher relative humidity,
condensation can reach several litters per hour. This phenomenon is sometimes
mistaken for a leak.
7

Publicité

Table des Matières
loading

Produits Connexes pour habitat et jardin Mini Comfort

Ce manuel est également adapté pour:

1436103283103459103460

Table des Matières