Samsung WB09H7 Serie Manuel D'utilisation page 19

To share the drain hole with an existing washer
To share one drain hole with an existing washer, use the drain T adaptor.
1. Connect the drain hose (A) of the sanitizing washer to the
drain adaptor (B) as shown.
2. Insert the drain hose (C) of the existing washer into the drain
adaptor (B) as shown.
3. Insert the drain adaptor to the drain hole (D) as shown.
CAUTION
• If the drain adaptor does not fit in the drain hole, water may leak around the drain hole.
• Ensure that the drain adaptor covers the drain hole.
Untitled-2 19
English - 19
C
B
A
B
D
2014-05-26 10:51:13