Before The First Use; Cleaning And Maintenance - Kiwi KC 8220 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or
plastic from the device.
• Before using your appliance for the first time, wipe off all removable parts with a damp cloth.
Never use abrasive products.
• Place the device on a flat stable surface and ensure a minimum of 10 cm free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the
device matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz)
• The blades of the slicing and chopping disk are very sharp, avoid any physical contact, you
can get seriously injured.
USE
1. Place the blade holder into the motor unit.
2. Choose the interchangeable blade you want and stick it into the rack.
Please note: the interchangeable blade are sharp; pick up by the plastic parts.
3. Now place the Lid with fill opening on the blade and twist them in a clockwise direction until
you can feel them lock into place.
Note: if the Lid with fill opening are not well in place, it will not be possible to operate the
machine.
4. Place the transparent bowl inside the appliance to collect the food after it has been cut
into a spiral shape.
5. Now insert the mains plug into the socket.
6. Then press the pusher sharp edges on the piece of vegetable.
Note: be careful of sharp edges
7. Insert the vegetable into the Lid with fill opening and turn the appliance ON using the start/
stop button.
Note: only press lightly with the pusher onto the piece of vegetable so that they are in contact
with the insert while slicing.
8. Turn the appliance off after cutting in order to fill it again.
9. Remove the mains plug once you are finished cutting.
Please note: the blades are sharp; pick up by the plastic parts.
· Do not operate the appliance longer than 7 min. If you have not finished blending after 7
minutes, switch the appliance off and wait a little before you continue using it.

CLEANING AND MAINTENANCE

• Before cleaning, unplug the appliance and wait for the appliance to cool down.
• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad
or steel wool, which damages the device.
• Never immerse the device in water or any other liquid. The device is not dishwasher proof.
CAUTION: Be careful not to hurt yourself on the sharp blades and edges.
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be taken to
a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance,
instruction manual and packaging puts your attention to this important issue. The materials used in this
appliance can be recycled. By recycling used domestic appliances you contribute to foment the protection
of our environment. Ask your local authorities for information regarding the point of recollection.
KC 8220 Instruction Manual
3

Publicité

Table des Matières
loading

Table des Matières