Important Safety Informations - Romus 96202 Mode D'emploi

Important safety informations

Damage caused if you are not respecting these instructions will cancel the
warranty! Moreover, we are not responsible for damage or injury caused by
improper handling or non-respect of the safety instructions. These cases cancel
the warranty.
This unit is suitable for external use only when used correctly. This lamp can not be used on
building sites, engineering workshops and similar applications. This lamp must be installed
by a qualified electrician.
This lamp can not be used on building sites, engineering workshops and similar applications.
Replace the cracked protection glass immediately and use only original parts to substitute.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order to
avoid a hazard.
Electrical safety
This lamp must be earthed. If it becomes necessary to re-wire the plug please follow these
guidelines. Always secure wires in plug terminals carefully. Make sure the cable is firmly
located in the cord grip. NEVER connect the green & yellow wire to any terminal other than
one marked with the earth symbol 'E' or '
wiring for damage Any faults should be immediately rectified before further use of this lamp.
Always have the wiring and connections checked by a qualified electrician. In use, ensure all
wiring and extension cable are kept clear of any cutting tools, sharp objects and any other
potential hazard such as wet floors, chemicals, solvents etc.
Read the User Instructions carefully before use:

Do not look directly into the work lamp when it is switched on

Keep out of the reach of children.

Can be used indoors and outdoors, please charge the lamp in dry indoor location, do
not immerse in water or any other liquid.
', regularly inspect all electrical connections and
9