Safety Precautions; Safety Informations; Technical Data; Charging Using The 110-230 V Mains Unit - Romus 96215 Mode D'emploi

Baladeuse led
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Do not use the lamp in the immediate vicinity of inflammable materials or gases.
Make sure that the illuminants are not covered during use.
Only use the accessories included with the product for recharging your
rechargeable workshop lamp.
Keep the lamp out of reach of unauthorised persons, especially children.
Do not point the light directly in your own or any other person's or animal's eyes.
Always check the mains cable before you use the charger. If the mains cable is damaged, replace
the charger.
Type
Rated power
96215
2W SMD
protection class: III
Usage period: Approx. 3h on one charge
Charging period: Approx. 3h
Rated voltage: 3.7V – rechargeable battery, NiMH, 1,100 mAh
Comes to pay tribute the magnet, may adsorb on the iron hardware
Plug the power supply into an ordinary 110-230V AC mains power socket.
Plug the charger cable into the corresponding socket on the handgrip.
The red LED will light up during the charge.
Once the batteries are completely charged, the LED turns green.

SAFETY PRECAUTIONS

TECHNICAL DATA

Lumen
temperature
200
-5° - +40°C

CHARGING USING THE 110-230 V MAINS UNIT

8
Ambient
Power supply
5 V, 1000 mA
With a car charger
5v, 1000mA

Publicité

Table des Matières
loading

Table des Matières