Assembly And Use; Maintenance - Romus 96202 Mode D'emploi

CAUTION
This unit can become extremely hot whilst in operation; do not touch the unit until it
has had time to cool down, make sure this lamp are far enough away from any
combustible materials and/or surfaces, Make sure there is adequate ventilation to aid
heat dissipation.

Assembly and use

Slide the stand into this lamp bracket. Align the holes in the bracket and the stand. Insert and
tighten angle adjustment screw knob. To alter the angle of this lamp, simply loosen the angle
adjustment screw knob, pivot this lamp until the desired angle is achieved and re-tighten
knob.
Check this lamp are secure and that the stand is stable and has a firm footing.
Ensure cable is not catching on any sharp object and that the mains plug connection is
adequately protected against rain or moisture.
Your lamp is now ready for use.

Maintenance

CAUTION:
The light source of lamp can not be replaced.
Do not use the lamp without shade. If shade is broken stop using the lamp and replace a
new shade.
Handle
Battery
Stand
Car
Charger
charger
10