I9 Set Day Mode; I10 Set Auto Commutation - Comelit 1998NV Manuel Technique

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

I9 Set day mode

You can decide to organise the week by selecting
one of these 3 operating modes for each day:
• AUTO: the system switches from DAY to NIGHT
mode in the scheduled time bands.
• NIGHT: the system is in this mode for the whole day.
• DAY: the system is in this mode for the whole day.
If the "auto" setting is selected, throughout the day
the operating mode will switch at pre-set times, on
the basis of the programming set in accordance with
paragraph "I10 - Set Auto commutation".
To disable the function, press
To activate it:
- press MENU and use the
Settings menu, then press OK;
• Settings
• Configurations
• Namedir
• Incoming call
• Alarms
- use the
keys to view the day mode menu,
then press OK;
• Date
• Time
• Themes
• Timing
• Day mode
- use the
keys to show the day to be set and
select night, day or auto mode using the
Enable
Sun
Night
Mon
Night
Tue
Night
Esc
- once programming has been completed for every
day of the week, navigate to the Enable option and
enable the programming using ; to disable use ;
- press OK to confirm the settings;
- press ESC repeatedly to return to the main screen.
60
.
keys to view the
14 :15 : 26
Mon 12 Mar 20
14 :15 : 26
Mon 12 Mar 20
keys.
14 :15 : 26
Mon 12 Mar 20
Wed
Night
Thu
Night
Fri
Night
Sat
Night
Ok

I10 Set auto commutation

The system can be set to allow automatic switching
from DAY mode to NIGHT mode at specific times as
programmed by the user. Up to 4 TIMETABLES can
be set, and switching mode will be set for each on
(Day or Night).
Example:
You want to configure the switchboard with the fol-
lowing parameters:
07:00 - 12:00 Day mode operation
13:00 - 22:00 Day mode operation
Cmt1
07
Cmt2
12
Cmt3
13
Cmt4
22
Esc
- press MENU and use the
Settings menu, then press OK;
• Settings
• Configurations
• Namedir
• Incoming call
• Alarms
- use the
keys to view the Auto commutation
menu, then press OK;
• Time
• Themes
• Timing
• Day mode
• Auto commutation
- the cursor will automatically be positioned on the min.
time for switching 1; decrease or increase the value using
the
keys.
The value ranges from 00 to 23.
14 :15 : 26
Mon 12 Mar 20
00
:
Day
00
:
Night
00
:
Day
00
:
Night
Ok
keys to view the
14 :15 : 26
Mon 12 Mar 20
14 :15 : 26
Mon 12 Mar 20

Publicité

Table des Matières
loading

Table des Matières