Heylo HL 800 Mode D'emploi page 21

Masquer les pouces Voir aussi pour HL 800:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
Optional E11 main filter:
Combination filter of carbon filter and EPA filter E11 according to EN1822
filter change once a year
Optional anti-virus filter:
Combination filter of carbon filter and HEPA H14 filter according to EN1822
▪ for suspended matter and particles up to 1 µm
▪ separation efficiency 99.995 %
▪ suitable for rooms with the highest requirements, in laboratories, industry and
medicine.
filter change once a year
Ionizer
The ionizer is located inside the unit and cannot be replaced.
The function is normally switched on. To switch off the function, press the
the "Filter key" and the "Mode key" until a sound signal is emitted.
1 tone: the function is on
2 tones: the function is switched off
Particle sensor
For the air quality display, a sensor measures the particles in the room air. This sensor should also be
cleaned regularly.
Fig.1
To do this, open the flap on the back of the unit (Fig.1) and carefully wipe the sensor clean with a
cotton swab.
for suspended matter and particles up to 1 µm
separation efficiency 99,9%
suitable for rooms with the highest requirements
Cotton swab
21
EN

Publicité

Table des Matières
loading

Table des Matières