- To wake up the transmitter, press "HOME" for 2 seconds.
- Press OK key, and select "TBOS Radio" with OFF key, then validate by
pressing OK.
- Select ''Radio Relay List'' and validate with OK.
- Finding Screen is displayed during 25 to 60 seconds
depending on the number of relays.
- Once the finding command ending, the radio relays list is displayed with the following information:
. Name of each relay (TBOS Radio Relay or Master Radio Module)
. Radio reception level between TBOS-II
. Battery charge level of all TBOS Radio relay
The Radio relay list is not saved. A new finding is necessary for each connection.
Automatic TBOS finding from Radio relay
- From the Radio Realys list, launch an automatic finding command. Up to 32 TBOS controllers can be located and listed.
Field Transmitter and Radio Relay
TM
ENG
37